CdS QDs grown on ellipsoidal BiVO4 for efficient photocatalytic degradation of tetracycline.

Designing efficient, inexpensive, and stable photocatalysts to degrade organic pollutants and antibiotics has become an effective way for environmental remediation. In this work, we successfully performed in situ growth of CdS QDs on the surface of elliptical BiVO4 to try to show the advantage of the binary heterojuncted photocatalyst (BVO@CdS) for the photocatalytic degradation of tetracycline (TC). The In situ growth of CdS QDs can provide a large number of reactive sites and also generate a larger contact area with BiVO4. In addition, compared with mechanical composite materials, in situ growth can significantly reduce the energy barrier at the interface between BiVO4 and CdS, providing more channels for the separation and migration of photogenerated charge carriers, and further improving reaction activity. As a result, BVO@CdS-0.05 shows the best degradation efficiency, with a degradation rate of 88% after 30 min under visible light. The TC photodegradation follows a pseudo-second-order reaction with a dynamic constant of 0.472 min-1, which is 6.47 times that of pure BiVO4, 7.24 times that of pure CdS QDs and 2 times that of the mechanical composite. The degradation rate of BVO@CdS-0.05 decreases to 77.8% with a retention rate of 88.5% after four cycles, demonstrating excellent stability. Through liquid chromatography-mass spectrometry (LC-MS) analysis, two possible pathways for TC degradation are proposed. Through free radical capture experiments, electron spin resonance measurements, and photoelectrochemical comprehensive analysis, it is confirmed that BVO@CdS composites have constructed an efficient Z-scheme heterojunction via in situ growth, thereby highly enhancing the separation and transport efficiency of charge carriers.

Hierarchical Hollow TiO2@Bi2WO6 with Light-Driven Excited Bi(3-x)+ Sites for Efficient Photothermal Catalytic CO2 Reduction.

Converting CO2 into valuable chemicals via sustainable energy sources is indispensable for human development. Photothermal catalysis combines the high selectivity of photocatalysis and the high yield of thermal catalysis, which is promising for CO2 reduction. However, the present photothermal catalysts suffer from low activity due to their poor light absorption ability and fast recombination of photogenerated electrons and holes. Here, a TiO2@Bi2WO6 heterojunction photocatalyst featuring a hierarchical hollow structure was prepared by an in situ growth method. The visible light absorption and photothermal effect of the TiO2@Bi2WO6 photocatalyst is promoted by a hierarchical hollow structure, while the recombination phenomenon is significantly mitigated due to the construction of the heterojunction interface and the existence of excited Bi(3-x)+ sites. Such a catalyst exhibits excellent photothermal performance with a CO yield of 43.7 µmol h-1 g-1, which is 15 and 4.7 times higher than that of pure Bi2WO6 and that of physically mixed TiO2/Bi2WO6, respectively. An in situ study shows that the pathway for the transformation of CO2 into CO over our TiO2@Bi2WO6 proceeds via two important intermediates, including COO- and COOH-. Our work provides a new idea of excited states for the design and synthesis of highly efficient photothermal catalysts for CO2 conversion.

Engineering surface framework TiO6 single sites for unprecedented deep oxidative desulfurization.

Catalytic oxidative desulfurization (ODS) using titanium silicate catalysts has emerged as an efficient technique for the complete removal of organosulfur compounds from automotive fuels. However, the precise control of highly accessible and stable-framework Ti active sites remains highly challenging. Here we reveal for the first time by using density functional theory calculations that framework hexa-coordinated Ti (TiO6) species of mesoporous titanium silicates are the most active sites for ODS and lead to a lower-energy pathway of ODS. A novel method to achieve highly accessible and homogeneously distributed framework TiO6 active single sites at the mesoporous surface has been developed. Such surface framework TiO6 species exhibit an exceptional ODS performance. A removal of 920 ppm of benzothiophene is achieved at 60°C in 60 min, which is 1.67 times that of the best catalyst reported so far. For bulky molecules such as 4,6-dimethyldibenzothiophene (DMDBT), it takes only 3 min to remove 500 ppm of DMDBT at 60°C with our catalyst, which is five times faster than that with the current best catalyst. Such a catalyst can be easily upscaled and could be used for concrete industrial application in the ODS of bulky organosulfur compounds with minimized energy consumption and high reaction efficiency.

Synergistic Protecting-Etching Synthesis of Carbon Nanoboxes@Silicon for High-Capacity Lithium-Ion Battery.

Silicon (Si) is considered as the most likely choice for the high-capacity lithium-ion batteries owing to its ultrahigh theoretical capacity (4200 mA h g-1) being over 10 times than that of traditional graphite anode materials (372 mA h g-1). However, its widespread application is limited by problems such as a large volume expansion and low electrical conductivity. Herein, we design a hollow nitrogen-doped carbon-coated silicon (Si@Co-HNC) composite in a water-based system via a synergistic protecting-etching strategy of tannic acid. The prepared Si@Co-HNC composite can effectively mitigate the volume change of silicon and improve the electrical conductivity. Moreover, the abundant voids inside the carbon layer and the porous carbon layer accelerate the transport of electrons and lithium ions, resulting in excellent electrochemical performance. The reversible discharge capacity of 1205 mA h g-1 can be retained after 120 cycles at a current density of 0.5 A g-1. In particular, the discharge capacity can be maintained at 1066 mA h g-1 after 300 cycles at a high current density of 1 A g-1. This study provides a new strategy for the design of Si-based anode materials with excellent electrical conductivity and structural stability.

Eliminating Non-Corner-Sharing Octahedral for Efficient and Stable Perovskite Solar Cells.

The metal halide (BX6)4- octahedron, where B represents a metal cation and X represents a halide anion, is regarded as the fundamental structural and functional unit of metal halide perovskites. However, the influence of the way the (BX6)4- octahedra connect to each other has on the structural stability and optoelectronic properties of metal halide perovskite is still unclear. Here, the octahedral connectivity, including corner-, edge-, and face-sharing, of various CsxFA1-xPbI3 (0 ≤ x ≤ 0.3) perovskite films is tuned and reliably characterized through compositional and additive engineering, and with ultralow-dose transmission electron microscopy. It is found that the overall solar cell device performance, the charge carrier lifetime, the open-circuit voltage, and the current density-voltage hysteresis are all improved when the films consist of corner-sharing octahedra, and non-corner sharing phases are suppressed, even in films with the same chemical composition. Additionally, it is found that the structural, optoelectronic, and device performance stabilities are similarly enhanced when non-corner-sharing connectivities are suppressed. This approach, combining macroscopic device tests and microscopic material characterization, provides a powerful tool enabling a thorough understanding of the impact of octahedral connectivity on device performance, and opens a new parameter space for designing high-performance photovoltaic metal halide perovskite devices.

Intraparticle ripening to create hierarchically porous Ti-MOF single crystals for deep oxidative desulfurization.

The catalytic oxidative desulfurization (ODS) technique is able to remove sulfur compounds from fuels, conducive to achieving deep desulfurization for the good of the ecological environment. Ti-based metal-organic frameworks (Ti-MOFs) possessing good affinity to organic reactants and considerable numbers of Ti active sites are promising catalysts for ODS. However, current Ti-MOFs suffer from severe diffusion limitations caused by the size mismatch between sole micropores and bulky sulfur compounds, leading to poor ODS performance. Here, a facile method of intraparticle ripening without any additive is developed to obtain hierarchically meso-microporous Ti-MIL-125 single crystals (Meso-Ti-MIL-125) for the first time. Such Meso-Ti-MIL-125 shows a BET surface area of 1401 m2 g-1 and a mesoporous volume that is 1.7 times as high as that of the conventional Ti-MIL-125. Our novel Meso-Ti-MIL-125 exhibits excellent catalytic performance in the ODS of a series of bulky thiophenic sulfur compounds, completely removing benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (DMDBT) from model fuels, which is, respectively, 2.4 times, 1.5 times, and 6.7 times higher than the removal achieved with conventional Ti-MIL-125. Such a facile synthetic strategy is envisioned to be applied in many kinds of crystalline materials, such as zeolites, for industrial production.

Fractal Design of Hierarchical PtPd with Enhanced Exposed Surface Atoms for Highly Catalytic Activity and Stability.

Hierarchical assembly of arc-like fractal nanostructures not only has its unique self-similarity feature for stability enhancement but also possesses the structural advantages of highly exposed surface-active sites for activity enhancement, remaining a great challenge for high-performance metallic nanocatalyst design. Herein, we report a facile strategy to synthesize a novel arc-like hierarchical fractal structure of PtPd bimetallic nanoparticles (h-PtPd) by using pyridinium-type ionic liquids as the structure-directing agent. Growth mechanisms of the arc-like nanostructured PtPd nanoparticles have been fully studied, and precise control of the particle sizes and pore sizes has been achieved. Due to the structural features, such as size control by self-similarity growth of subunits, structural stability by nanofusion of subunits, and increased numbers of exposed active atoms by the curved homoepitaxial growth, h-PtPd displays outstanding electrocatalytic activity toward oxygen reduction reaction and excellent stability during hydrothermal treatment and catalytic process.

Hierarchical zeolites containing embedded Cd0.2Zn0.8S as a photocatalyst for hydrogen production from seawater.

Uncovering an efficient and stable photocatalytic system for seawater splitting is a highly desirable but challenging goal. Herein, Cd0.2Zn0.8S@Silicalite-1 (CZS@S-1) composites, in which CZS is embedded in the hierarchical zeolite S-1, were prepared and show remarkably high activity, stability and salt resistance in seawater.

Identification and degradation of structural extracellular polymeric substances in waste activated sludge via a polygalacturonate-degrading consortium.

By maintaining the cell integrity of waste activated sludge (WAS), structural extracellular polymeric substances (St-EPS) resist WAS anaerobic fermentation. This study investigates the occurrence of polygalacturonate in WAS St-EPS by combining chemical and metagenomic analyses that identify ∼22% of the bacteria, including Ferruginibacter and Zoogloea, that are associated with polygalacturonate production using the key enzyme EC 5.1.3.6. A highly active polygalacturonate-degrading consortium (GDC) was enriched and the potential of this GDC for degrading St-EPS and promoting methane production from WAS was investigated. The percentage of St-EPS degradation increased from 47.6% to 85.2% after inoculation with the GDC. Methane production was also increased by up to 2.3 times over a control group, with WAS destruction increasing from 11.5% to 28.4%. Zeta potential and rheological behavior confirmed the positive effect which GDC has on WAS fermentation. The major genus in the GDC was identified as Clostridium (17.1%). Extracellular pectate lyases (EC 4.2.2.2 and 4.2.2.9), excluding polygalacturonase (EC 3.2.1.15), were observed in the metagenome of the GDC and most likely play a core role in St-EPS hydrolysis. Dosing with GDC provides a good biological method for St-EPS degradation and thereby enhances the conversion of WAS to methane.

Chelation-Assisted formation of carbon nanotubes interconnected Yolk-Shell Silicon/Carbon anodes for High-Performance Lithium-ion batteries.

As a viable replacement to commercial graphite anodes, silicon (Si) anodes have gained much attention from academics because of their considerable theoretical specific capacity and appropriate reaction voltage. Nevertheless, some limitations still exist in developing silicon anodes, including significant volume expansion and poor electrical conductivity. Herein, the carbon nanotubes (CNTs) interconnected yolk-shell silicon/carbon anodes (YS-Si@CoNC) were prepared via the chelation competition induced polymerization (CCIP) approach. The YS-Si@CoNC anode, designed in this study, demonstrates improved performance. At the current density of 0.5 A g-1 and 1 A g-1, a capacity of 1001 mAh g-1 and 956.5 mAh g-1 can be achieved after 150 cycles and after 300 cycles, respectively. In particular, at the current density of 5 A g-1, the reversible specific capacity of 688 mAh g-1 is realized. The exceptional outcomes are mainly attributed to the internal voids that adequately alleviate the volumetric expansion and the CNTs and carbon shells that provide an efficient conducting matrix to fasten the diffusion of electrons and lithium-ions. Our research presents a convenient way of designing Si/C anode materials with a yolk-shell structure to guarantee impressive electrical conductivity and robust structural integrity for high-performance LIBs.

Mesoporous Pt@Pt-skin Pt3Ni core-shell framework nanowire electrocatalyst for efficient oxygen reduction.

The design of Pt-based nanoarchitectures with controllable compositions and morphologies is necessary to enhance their electrocatalytic activity. Herein, we report a rational design and synthesis of anisotropic mesoporous Pt@Pt-skin Pt3Ni core-shell framework nanowires for high-efficient electrocatalysis. The catalyst has a uniform core-shell structure with an ultrathin atomic-jagged Pt nanowire core and a mesoporous Pt-skin Pt3Ni framework shell, possessing high electrocatalytic activity, stability and Pt utilisation efficiency. For the oxygen reduction reaction, the anisotropic mesoporous Pt@Pt-skin Pt3Ni core-shell framework nanowires demonstrated exceptional mass and specific activities of 6.69 A/mgpt and 8.42 mA/cm2 (at 0.9 V versus reversible hydrogen electrode), and the catalyst exhibited high stability with negligible activity decay after 50,000 cycles. The mesoporous Pt@Pt-skin Pt3Ni core-shell framework nanowire configuration combines the advantages of three-dimensional open mesopore molecular accessibility and compressive Pt-skin surface strains, which results in more catalytically active sites and weakened chemisorption of oxygenated species, thus boosting its catalytic activity and stability towards electrocatalysis.

Unveiling the Intrinsic Structure and Intragrain Defects of Organic-Inorganic Hybrid Perovskites by Ultralow Dose Transmission Electron Microscopy.

Transmission electron microscopy (TEM) is a powerful tool for unveiling the structural, compositional, and electronic properties of organic-inorganic hybrid perovskites (OIHPs) at the atomic to micrometer length scales. However, the structural and compositional instability of OIHPs under electron beam radiation results in misunderstandings of the microscopic structure-property-performance relationship in OIHP devices. Here, ultralow dose TEM is utilized to identify the mechanism of the electron-beam-induced changes in OHIPs and clarify the cumulative electron dose thresholds (critical dose) of different commercially interesting state-of-the-art OIHPs, including methylammonium lead iodide (MAPbI3 ), formamidinium lead iodide (FAPbI3 ), FA0.83 Cs0.17 PbI3 , FA0.15 Cs0.85 PbI3 , and MAPb0.5 Sn0.5 I3 . The critical dose is related to the composition of the OIHPs, with FA0.15 Cs0.85 PbI3 having the highest critical dose of ≈84 e Å-2 and FA0.83 Cs0.17 PbI3 having the lowest critical dose of ≈4.2 e Å-2 . The electron beam irradiation results in the formation of a superstructure with ordered I and FA vacancies along <110>c , as identified from the three major crystal axes in cubic FAPbI3 , <100>c , <110>c , and <111>c . The intragrain planar defects in FAPbI3 are stable, while an obvious modification is observed in FA0.83 Cs0.17 PbI3 under continuous electron beam exposure. This information can serve as a guide for ensuring a reliable understanding of the microstructure of OIHP optoelectronic devices by TEM.

Ti-MOF single-crystals featuring an intracrystal macro-microporous hierarchy for catalytic oxidative desulfurization.

For the first time, we demonstrate a Ti-MOF (Ti-metal organic framework) single-crystal featuring an intracrystal macro-microporous hierarchy (Hier-NTU-9) by a vapor-assisted polymer-templated method. This Hier-NTU-9 possesses macropores (100-1000 nm) derived from polymer templates and enhanced transport ability of bulky molecules, exhibiting almost double the desulfurization activity compared to the conventional NTU-9.

The three-dimensionally ordered microporous CaTiO3 coupling Zn0.3Cd0.7S quantum dots for simultaneously enhanced photocatalytic H2 production and glucose conversion.

Glucose conversion assisted photocatalytic water splitting technology to simultaneously produce H2 and high value-added chemicals is a promising method for alleviating the energy shortage and environmental crisis. In this work, we constructing type II heterojunction by in-situ coupling Zn0.3Cd0.7S quantum dots (ZCS QDs) on three-dimensionally ordered microporous CaTiO3 (3DOM CTO) for photocatalytic H2 production and glucose conversion. The DFT calculations demonstrate that substitution of Zn on the Cd site improves the separation and transmission of photogenerated carriers. Therefore, 3DOM CTO-ZCS composite exhibits best H2 production performance (2.81 mmol g-1h-1) and highest apparent quantum efficiency (AQY) (5.56 %) at 365 nm, which are about 47 and 18 times that of CTO nanoparticles (NPs). The improved catalytic performance ascribed to not only good mass diffusion and exchange, highly efficient light harvesting of 3DOM structure, but also the efficient charges separation of type Ⅱ heterojunction. The investigation on photocatalytic mechanism indicates that the glucose is mainly converted to gluconic acid and lactic acid, and the control reaction step is gluconic acid to lactic acid. The selectivity for gluconic acid on 3DOM CTO-ZCS is 85.65 %. Our work here proposes a green sustainable method to achieve highly efficient H2 production and selective conversion of glucose to gluconic acid.

Phase Conversion Accelerating "Zn-Escape" Effect in ZnSe-CFs Heterostructure for High Performance Sodium-Ion Half/Full Batteries.

Sodium-ion batteries (SIBs) are considered as a promising large-scale energy storage system owing to the abundant and low-cost sodium resources. However, their practical application still needs to overcome some problems like slow redox kinetics and poor capacity retention rate. Here, a high-performance ZnSe/carbon fibers (ZnSe-CFs) anode is demonstrated with high electrons/Na+ transport efficiency for sodium-ion half/full batteries by engineering ZnSe/C heterostructure. The electrochemical behavior of the ZnSe-CFs heterostructure anode is deeply studied via in situ characterizations and theoretical calculations. Phase conversion is revealed to accelerate the "Zn-escape" effect for the formation of robust solid electrolyte interphase (SEI). This leads to the ZnSe-CFs delivering a superior rate performance of 206 mAh g-1 at 1500 mA g-1 for half battery and an initial discharge capacity of 197.4 mAh g-1 at a current density of 1 A g-1 for full battery. The work here heralds a promising strategy to synthesize advanced heterostructured anodes for SIBs, and provides the guidance for a better understanding of phase conversion anodes.

All-Inorganic Perovskite Single-Crystal Photoelectric Anisotropy.

Engineering surface structure can precisely and effectively tune the optoelectronic properties of halide perovskites, but are incredibly challenging. Herein, the design and fabrication of uniform all-inorganic CsPbBr3 cubic/tetrahedral single-crystals are reported with precise control of the (100) and (111) surface anisotropy, respectively. By combining with theoretical calculations, it is demonstrated that the preferred (100) surface engineering of the CsPbBr3 single-crystals enables a lowest surface bandgap energy (2.33 eV) and high-rate carrier mobility up to 241 µm2  V-1  s-1 , inherently boosting their light-harvesting and carrier-transport capability. Meanwhile, the polar (111) surface induces ≈0.16 eV upward surface-band bending and ultrahigh surface defect density of 1.49 × 1015  cm-3 , which is beneficial for enhancing surface-defects-catalyzed reactions. The work highlights the anisotropic surface engineering for boosting perovskite optoelectronic devices and beyond.

Gradient selenium-doping regulating interfacial charge transfer in zinc sulfide/carbon anode for stable lithium storage.

Metal sulfides have attracted much attentions as anode materials for lithium-ion batteries (LIBs) because of the high theoretical capacity. However, the poor electronic conductivity and large volume variation usually give rise to the rapid capacity decay and undesirable rate performance, severely hampering their practical application. Herein, a gradient selenium-doped hollow sandwich structured zinc sulfide/carbon (ZnS/C) composite (Se-HSZC) is designed and fabricated as long life-span and stable anode material for LIBs. The gradient Se-doping enhances the interfacial charge transfer in Se-HSZC, while the unique double carbon shell sandwich structure further greatly reduces the volume expansion and ensures the electron fast transportation. Consequently, the Se-HSZC anode presents outstanding rate capability (654 mAh g-1 at 2 A g-1) with remarkable reversible capacity (567 mAh g-1 after 1500 cycles at 4 A g-1) for the half battery. In particular, a reversible capacity of 457 mAh g-1 at 0.5 A g-1 is achieved after 50 cycles for the full battery with LiNi0.6Co0.2Mn0.2O2 as cathode. This work offers a promising design route of novel metal sulfides nanostructures for high performance LIBs.

Ultrafast and stable phase transition realized in MoTe2-based memristive devices.

Phase engineering of two-dimensional transition metal dichalcogenides has received increasing attention in recent years due to its atomically thin nature and polymorphism. Here, we first realize an electric-field-induced controllable phase transition between semiconducting 2H and metallic 1T' phases in MoTe2 memristive devices. The device performs stable bipolar resistive switching with a cycling endurance of over 105, an excellent retention characteristic of over 105 s at an elevated temperature of 85 °C and an ultrafast switching of ∼5 ns for SET and ∼10 ns for RESET. More importantly, the device works in different atmospheres including air, vacuum and oxygen, and even works with no degradation after being placed in air for one year, indicating excellent surrounding and time stability. In situ Raman analysis reveals that the stable resistive switching originates from a controllable phase transition between 2H and 1T' phases. Density functional theory calculations reveal that the Te vacancy facilitates the phase transition in MoTe2 through decreasing the barrier between 2H and 1T' phases, and serving as nucleation sites due to the elimination of repulsive forces. This electric-field-induced controllable phase transition in MoTe2 devices offers new opportunities for developing reliable and ultrafast phase transition devices based on atomically thin membranes.

Elucidating the production and inhibition of melanoidins products on anaerobic digestion after thermal-alkaline pretreatment.

The refractory organics released from waste activated sludge (WAS) are unwanted produced in thermal-alkaline pretreatment, which are not well documented. In this study, we refer to them as melanoidins products (MPs) with characteristics of high molecular weight and inhibition to microbes. The results showed that these MPs from thermal-alkaline (80 °C and pH 10) pretreatment of WAS were identified with a broad molecular weight (>1000 Da). Dark-colored MPs were further verified from glucose and tryptophan as the model components, with values of UV280 and UV420 increasing. The produced MPs with a molecular weight of 1220, 6835, and even 21,200,000 Da were confirmed by SEC-HPLC. Unexpectedly, MPs were found to be electroactive with higher redox peak values than that of humic acids, which were almost not degraded by anaerobes as revealed by SEC-HPLC and 3D-EEM spectra. For the first time, the results demonstrated that MPs delayed volatile fatty acids production and reduced the methane yield (22-26% lower), which was likely attributed to the toxicity and/or electrons competition with anaerobes such as Methanosaeta. Thus, it is clear that MPs negatively impact anaerobic digestion after thermal-alkaline pretreatment, which shall be re-evaluated to minimize MPs when producing biochemicals from WAS.

Nickel clusters accelerating hierarchical zinc indium sulfide nanoflowers for unprecedented visible-light hydrogen production.

As a typical two-dimensional (2D) metal chalcogenides and visible-light responsive semiconductor, zinc indium sulfide (ZnIn2S4) has attracted much attention in photocatalysis. However, the high recombination rate of photogenerated electrons and holes seriously limits its performance for hydrogen production. In this work, we report in-situ photodeposition of Ni clusters in hierarchical ZnIn2S4 nanoflowers (Ni/ZnIn2S4) to achieve unprecedented photocatalytic hydrogen production. The Ni clusters not only provide plenty of active sites for reactions as evidenced by in-situ photoluminescence measurement, but also effectively accelerate the separation and migration of the photogenerated electrons and holes in ZnIn2S4. Consequently, the Ni/ZnIn2S4 composites exhibit good stability and reusability with highly enhanced visible-light hydrogen production. In particular, the best Ni/ZnIn2S4 photocatalyst exhibits an unprecedented hydrogen production rate of 22.2 mmol·h-1·g-1, 10.6 times that of the pure ZnIn2S4 (2.1 mmol·h-1·g-1). And its apparent quantum yield (AQY) is as high as 56.14% under 450 nm monochromatic light. Our work here suggests that depositing non-precious Ni clusters in ZnIn2S4 is quite promising for the potential practical photocatalysis in solar energy conversion.